• High opacity and a full gloss durable finish
• Optimum durability
• Heavy bodied for high film build and good flow
• Can be used on all exterior and interior surfaces in the home, commercial and industrial premises
• Ideal for signwriting – background, feature and general work and for architectural – doors, trim and windows when a mirror high gloss finish is required

Application:

• Thoroughly stir the paint and apply with brush, roller or spray
• Feature Gloss Enamel is a high viscosity enamel and can be thinned with mineral turpentine to improve application properties

Surface Preparation:

• To ensure maximum durability and gloss level, surface preparation is most important
  Timber
• Exterior
• Prepare timber and apply Vipond’s Pink Primer followed by Vipond’s High Cover Undercoat
• Interior
• Sand and fill and apply Viponds High Cover Undercoat or Vipond’s Acrylic Easy Sand Undercoat
  Iron and Steel
• Clean surface of dirt, oil and grease and remove any rust then apply Vipond’s Zinc Phosphate Metal Primer
  Galvanised Iron and Aluminium
• Remove oil and grease with mineral turpentine and then apply
  Viponds Acrylic Metal primer
  Brick, Cement, Masonary, Plaster
• Prepare and apply Vipond’s Acrylic Concrete and Masonry Sealer
  followed by a coat of Vipond’s Quick Dry Undercoat
  Previously Painted
• Scrape off all loose and flaking paint and sand glossy surfaces.
• Wash down with sugar soap, spot prime bare areas with appropriate primer then apply Vipond’s Quick Dry Undercoat
• Some colours require a white or light grey undercoat to achieve the best result

Drying:

• Under normal drying conditions (15°C and low humidity) it is touch dry within 4 hours and through dry within 24 hours
• Recoat after 24 hours

** Please note colours are representations only **

** If you’re colour isn’t on the colour chart give us a call to get it made up – we can mix paint to match PMS colours, just pick “TINT” **